Our regular 700 Series – the heart of Ever-Power swiftness reducer product line – has been serving industry reliably for over 10 years. Its proven modular style has set the industry standard for efficiency and is the most imitated item in today’s worm gear velocity reducer market. But why settle for a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
Ever-Power worm gearboxes have earned a status to be an industry benchmark worldwide. Our achievement came from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes are inexpensive prices. High flexibility accorded through a wide choice of mounting options, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the market. The helical-worm and the double-worm version, with or without the torque limiter, soon add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low rate gear ratio. Being simple and compact in style, these gears can achieve higher gear ratio than the helical gears. These worm reduction gears having screw type characteristics are similar to helical gears, but its helix angle is typically comparatively larger) and its own body is normally quite lengthy in the axial direction. The gears in these gearboxes can be correct or left-handed depending upon the purpose.
Mounting option include universal housing, side flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (solitary or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a type of interlocking gear made up of a worm shaft and worm wheel. The worm is definitely shaped such as a screw and the worm wheel is usually a kind of gear machined to get a tooth profile with the same configuration.
The procedure of a worm gear is similar with that of a bolt and nut. The principle is the same as a nut that has been fixed to ensure that it cannot rotate and for that reason progresses in the axial direction when the bolt is usually turned.
The design of a worm gear is considered through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. Because of this, in a 1 speed reduction gears, the wheel could be manufactured so that it’ll be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This feature makes it possible to layout the turning transmission direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation direction of the worm wheel by changing the screw path.
A multitude of shaft layouts The wide selection of shaft layouts is one of the top features of interlocking gears.For instance, right shaft output, left shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Physique 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is definitely characteristic since the contact is certainly linear and the relative slide is great. In comparison with rolling power transmission, sound and vibration are extremely low. For this reason, this technology can be used to drive medical equipment, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
Selection
When selecting a worm reduction gears, the procedures for selecting the right gear are described in the manufacturer catalogs and the series and models should be selected according to those procedures. Particular care ought to be taken in important areas such as for example selecting the strain index, calculating the overhang load and examining heat rated capability from the manufacturer.
Cautions during use
When using a worm decrease gears, the heat produced through the initial period of make use of is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to improve the lubricating oil and to change the lubricating oil after that about 1 time per year according to the procedure manual provided by the manufacturer.
Product Description
The Worm Reduction Gear Box is provided by our company is of supreme quality. Our products are created through the use of premium quality materials and progress technology at our vendors end. They are widely used in various sectors. Our items are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Framework, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and secure operation. High load capability and overload functions. Output Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios available on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the sector worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute versatility is distributed by the wide choice of several mounting options, shaft configurations and electric motor interface, all offered as regular. The helicalworm and the doubleworm version, with or without the torque limiter, also add up, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, featuring a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) provides great versatility to suit a broad selection of applications and higher efficiency compared to the compact line XC, where in fact the emphasis is on space efficiency.
Series H supplies the same features as series X with an added plus: a spur gear pre-stage at the input end provides higher functionality and a broader range of ratios than the X series.
Frame sizes 110 and 90 feature a cast-iron casing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft comes as standard.
Broad range of possibilities:
second input, output flange, single or double extension result shaft, torque limiter with through cable, torque arm.