worm reduction gearbox

Our worm equipment reducers offer an option of a solid or hollow output shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, however, can withstand shock loading much better than other lowering gearbox styles, making them ideal for demanding applications.
Tough compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Sturdy or Hollow output shaft
Adjustable mounting position
Worm Gear Quickness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s quickness reducer product line – has been serving industry reliably for over 40 years. Its proven modular style has set the industry standard for performance and may be the most imitated product in today’s worm gear speed reducer market. But why accept a knock-off when you’re able to have the original – from EP Gear.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, along with greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for excessive torque and overhung loads.
Pipe plugs allow convenient fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) will be an ideal meet for motors with huge insight speeds, or when gearmotor effectiveness is important. Contact our technical sales staff for help determining which gearbox remedy is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and invite for a corner turn with optional dual result. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing flexibility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes offer a robust solution. The proper angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our speed reducers. These gearboxes are designed to deal with varying loads with little backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size is also available with plastic gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest performance and best output torque of most our quickness reducers. These gearboxes are created to handle varying loads with little backlash. Planetary gear reducers operate even more quietly than parallel shaft reducers. With 18 ratio choices ranging from 5:1 to 1000:1, we have a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for continuous duty applications. Their equipment cluster design provides an effective method for dissipating high temperature. Parallel shaft gearboxes have the shortest amount of our inline equipment reducer options therefore they work very well in environments with limited space. Our parallel shaft gear reducers provide an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, acceleration reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement in which a equipment in the type of a screw, also called a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms happen to be metal or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A major benefit of worm gear reducers is that they create an output that is 90° from the insight and can be used to transmit larger torque or decrease rotational speed. Most often, a worm gearbox offers right palm threads; to improve the path of the output, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio

If worm reduction gearbox thrills you, then you may be thinking about our internet site