Worm get gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to fit, high torque productivity is required. Great for student based tasks including robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting down to size. The motor is snap fitted into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small strolling robots, lifting mechanisms, and various other applications where huge torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them perfect candidates for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, even at suprisingly low voltages. We advise that you use stall-detection sensors, or simply check out your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on small threaded end of the shaft, although it is not particularly intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new standards for reliability, efficiency and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration now and a future proof alternative. The Ever-Power gear electric motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90º steps around the electric motor frame offering for unparalleled integration opportunities.
Ever-Power gear motors adhere to UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outside or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a good corner turn, optional dual result, or an inability for the engine to be back again driven. The DC right angle equipment motors are made for constant and intermittent duty operation. Our right angle gear reducers were created with several mounting plate options, making them perfect for a variety of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a little package size. Worm Gear Motors are excellent for applications that require a self- locking or breaking characteristic since the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Products will work with you to design and produce a Worm Gear Motor that will optimize the overall performance of your unique application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm electric motor runs on the metal gear box for durability and a higher torque output. Due to the special mechanical framework of the worm drive the engine output shaft is usually self locking and can not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Rated voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their strength in applications where high gear ratios are necessary. Our worm geared motors happen to be for that reason optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its own unique requirements. The EP series worm gear motors can be quickly and effectively adapted to meet your needs.
Worm gear units impress with their large power density and small style. If required, we can also source them with the highly effective nsd tupH surface treatment.
As well as the basic EP housing, we offer an extensive type of bolt-on parts to customize the product including torque arms, shaft addresses and output flanges. These could be easily field installed, but we may also be pleased to assemble the individual components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for severe and demanding industries like meals processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides unique fixing possibilities and enable a simple assembling for the customer.
Additional drive configurationscan be designed by use of built-in components (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm no load rate, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm vast, 40mm high, a good robust worm get gearbox powered by an MM28 electric motor (included), most suitable for applications where an easy to fit, high torque output is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most suitable for applications where a simple to match, high torque productivity is required
Ideal for student based projects including robots and buggies
Reversible Huge torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The motor is Gear DC electric motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electrical, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole electric motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option when compared to spur gear motor. How come worm gear so special? Check this wiki out: Worm Get.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when working with large reduction ratios, because of the increased friction involved between your worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This can be an advantage when it’s desired to remove any possibility of the result driving the input.”
In other phrases, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Would you like more info on worm motor? Get in touch with us today.