WORM SERVO GEAR REDUCER
Features
Wide range of servo gearboxes, designed to fit virtually all servo motors found on the market
Designed for the best torsional stiffness and the cheapest angular backlash, meant for the utmost torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The right technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and non-standard designs.
Catalogs:
Servo equipment reducers (worm, coaxial, helical and bevel helical systems) Catalog SR
Operating instructions:
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our selection of Servo Reducers, today offering five levels of precision to meet any software requirements. The five levels of precision obtainable allows a machine designer to select the required reducer precision to meet their requirements and their budget. They are available in both in-collection and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Normal applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, Electronic and B versions are identical, making it possible to interchange a unit with a higher or lower accuracy unit if needed.
A wide range of electric motor couplings and mounting flanges are available for the entire reducer range to install virtually any servo motor and the hollow bore output can be utilized to mount output shafts, pinion shafts, or other drive elements.
These reducers are usually selected predicated on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces depend on the driven load, the velocity vs. time profile for the routine, and any other external forces acting on the axis. For more selection info, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application information will be examined by our engineers, who will recommend the very best solution for the application.
EP Inc. offers a full range of modular servo gearboxes /worm reducers. The modular style allows for configurations with motor insight flange and result pinion for rack and pinion drives, and also solid output shafts, Hollow bore result, and insight shafts for all the positioning applications. The modular style allows for universal mounting of the gearbox in any orientation.
They can be used on motors with a NEMA23 standard flange via an adaptor package. As the gears are normally angled, they lead to a short total amount of the motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a simple and robust design, the series provides gearing ratios that range between 6:1 to 75:1. An individual may also customize the materials through the order, so as to match the gear to its intended app.
The Precision Planetary Gears of the EPRG series contains a thorough selection of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with dual shaft, right position shaft and right position output, in addition to a full range of adapters for engine mounting, making them with the capacity of meeting the requirements of even the most different applications. They are designed for make use of with integrated servo and stepper EP motors, mounted straight or via adaptor flanges, but can also be used in combination with other EP electric motor types. This selection of products is based on years of encounter and represents the end result of a decade-long analysis aimed at improving performance.
Maximum precision and dynamics, combined with outstanding torque density, will be the key requirements specific for reliable servo gearboxes in practice. EP offers servo gearboxes for any program and any efficiency range. Our low-backlash planetary and right-angle gearboxes reflect our passion for creativity and the best levels of precision.
Worm gear reducers provide market enhance solution with efficiency and flexibility. Low amount of basic models could be applied to an array of power ratings guaranteeing best performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are created for high-performance mechanical devices. When the motor quickness needs to be reduced, the result torque boosts and send torque completely to the application form. We believe that clients will appreciate our equipment reducer to achieve their demand. Just go to EP, you may get more information about servo gearheads, servo gearboxes, and equipment reducers. We continue to keep going forward for your support.
Plug the Quickness Reducer in to the desired channel of your receiver, and plug the lead from your own servo (or servo wye) in to the man servo lead from the circuit board. The arranged screw on the blue trim pot, located close to the top of the main circuit board, is utilized to control the speed of the servo. Switch the set screw completely clockwise (CW) for normal servo speed without speed reduction, completely counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial speed reduction. The reddish LED indicates three possible conditions: Sluggish Blinking = No Signal; Solid On = No Rate Decrease; Fast Blinking = Reduced Quickness Setting
Please note that if you make any modify to the speed environment as the receiver is on, you must cycle capacity to the receiver (change if off and back again on) for the new speed setting to take impact. This circuit may also be utilized in conjunction with our Servo Reverser to cause flap or retract servos to turn in opposite directions for correct function. Guidelines are included for easy set up and use.
IMPORTANT NOTE: This product will only focus on a regular, proportional servo. You won’t work on a retract-type servo, as they do not recognize any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, even by a transmitter which includes this function, as their design and electronics do not allow it. Check the FAQ page to find out more.
This device will reduce the speed of any regular, proportional servo. Connect it in the middle of your receiver and the servo (or servos) you wish to control for a far more scale-like movement of flaps or retracts. Adjustable, it can be set to lessen the swiftness of your servo from super-slow motion to no speed decrease at all, with an nearly infinite number of positions among. Maximum reduction time for a servo to visit 90 degrees is approximately 14 seconds, minimum time (no reduction) is simply the normal velocity of the servo. Great for reducing or removing the tendency of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by usage of a normal servo Y.
This is actually the new regulated version that can be utilized on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Lifestyle batteries. This unit won’t reduce the voltage going to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging devices, gantries, injection molding machines, pick and place, and linear slides.Provided in concentric shaft, correct position solid shaft, and correct angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to very easily mount to any manufacturer’s servo engine. The EP Series helical gears possess slanted teeth compared to spur gears with straight cut teeth, generating a smoother equipment mesh, yielding significantly lower noise levels.
The low backlash EP planetary servo gear units are created for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the best possible flexibility and cost-efficiency because don’t assume all application requires high-performance components.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units are available in the following versions:
PSC = B5 output, clean output shaft
PSKC = B5 result, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 output, with keyway

We address crucial concerns about servo gear reducer on our web site.