Penerangan Produk
High Rpm RV series Aluminum Alloy Worm Gear box NMRV 571-150 Reducer Variable Wheel Drive Speed Reduction Worm Gearbox
Parameter Produk
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
Products Description
NMRV worm gearbox reducer is a commodity with sophisticated design and continuous improvements, its main features are made of high quality aluminum alloy, light weight and non-rusting, larget output toque, smooth running and low noise, high radiating efficiency, good looking apprearance, derable service life, small volume and suitable for all mounting positions.
Feature
1. Mad of high-quality aluminum alloy,light weight and non-rusting
2. Large output torque
3. Smooth in running and low in noise,can work long time in dreadful conditions.
4. High in radiating efficiency.
5. Good-looking in appearance,durable in service life and small in volume.
6. Suitable for omnibearing installation.
contact-info.html
| Model | NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 |
| Nisbah | 5,7.5,10,15,20,25,30,40,50,60,80,100 |
| Tork Output | 1.8-1760Nm |
| Permohonan | Machinery Industry |
| Input Speed | 900-2800RPM |
| Output Speed | 10-250RPM |
| Material | Housing: Size 25-110 Is Aluminum Alloy, Size 110-150 Is Cast-Iron |
| Worm Wheel: ZCuSn10Pb1 | |
| Worm:20Cr | |
| Pinion:Tin Bronze | |
| Output Shaft: Steel-45# | |
| IEC Flange | IEC Standard Flange Or On Customer Request |
Foto Terperinci
Paparan Meletup:
About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZheJiang province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Produk digunakan secara meluas untuk aplikasi seperti: bahan makanan, seramik, pembungkusan, bahan kimia, farmasi, plastik, pembuatan kertas, jentera pembinaan, lombong metalurgi, kejuruteraan perlindungan alam sekitar, dan semua jenis talian automatik, dan talian pemasangan.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Kekerasan: | Permukaan Gigi yang Mengeras |
|---|---|
| Pemasangan: | 90 Degree |
| Susun atur: | Expansion |
| Bentuk Gear: | Gear Serong |
| Langkah: | Single-Step |
| Jenis: | Gear Reducer |
| Sampel: | US$ 30/Piece 1 Keping (Pesanan Minimum) | |
|---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Pelinciran: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
How to Calculate the Efficiency of a Worm Gearbox
Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:
- Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
- Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
- Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%
For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.
It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.
Bagaimanakah Kotak Gear Worm Berbanding dengan Kotak Gear Jenis Lain?
Worm gearboxes offer unique advantages and characteristics that set them apart from other types of gearboxes. Here’s a comparison between worm gearboxes and some other common types:
- Kotak Gear Heliks: Kotak gear cacing mempunyai pendaraban tork yang lebih tinggi, menjadikannya sesuai untuk aplikasi beban berat, manakala kotak gear heliks lebih cekap dan menawarkan operasi yang lebih lancar.
- Kotak Gear Serong: Kotak gear cacing adalah padat dan boleh menghantar gerakan pada sudut tepat, sama seperti kotak gear serong, tetapi kotak gear cacing mempunyai keupayaan mengunci sendiri.
- Kotak Gear Planet: Kotak gear cacing memberikan output tork yang tinggi dan kos efektif untuk aplikasi dengan nisbah pengurangan yang tinggi, manakala kotak gear planet menawarkan kecekapan yang lebih tinggi dan boleh mengendalikan kelajuan input yang lebih tinggi.
- Kotak Gear Spur: Kotak gear cacing mempunyai rintangan beban hentakan yang lebih baik disebabkan oleh gerakan gelongsornya, manakala kotak gear taji lebih cekap dan sesuai untuk aplikasi tork yang lebih rendah.
- Kotak Gear Sikloid: Kotak gear sikloidal mempunyai kapasiti beban kejutan yang tinggi dan reka bentuk yang padat, tetapi kotak gear cacing lebih menjimatkan kos dan boleh mengendalikan nisbah pengurangan yang lebih tinggi.
Walaupun kotak gear cacing mempunyai kelebihan seperti output tork yang tinggi, reka bentuk padat dan keupayaan mengunci diri, pilihan antara jenis kotak gear bergantung pada keperluan khusus aplikasi, termasuk tork, kecekapan, kelajuan dan batasan ruang.
editor by CX 2024-03-14