Small Speed Reducer Gearbox

Overview

Quick Details

Place of Origin:

Zhejiang, China

Brand Name:

EPT

Model Number:

RB-gearbox

Rated Power:

11kw

Gearing Arrangement:

Worm, Worm

Output Torque:

895

Input Speed:

1500r/min

Output Speed:

1400r/min

Ratio:

10,15,20,25,30,40,50,60

Rating:

11kw

Input:

1500r/min

Weight:

48 kg

Center distance:

125

NM:

895

Products name:

Small Speed Reducer Gearbox

color:

Green

Material of Shaft:

chromium steel

Supply Ability

Supply Ability:

10000 Set/Sets per Month small speed reducer gearbox

Packaging & Delivery

Packaging Details

Wooden case – Small Speed Reducer Gearbox

Port

Shanghai

Online Customization

#SuperSeptemberSmall Speed Reducer Gearbox

Product Overviews

Product Description

A.The features of Small Speed Reducer Gearbox

1. The reducers have the following features because of using plane enveloping worm gear as compared with other kinds of worm transmissions: larger loading capactiy and compact dimension and higher efficiency and smoother and quieter functioning longer service life.
2. In addition, the housings of these series reducers are made of high-strenghth aluminium alloy. So the reducers make the features of higher strength and lighter weight.
3. It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil(or synthetic gear oil) for lubrication. And allowed maximum working oil temperature is 100°C.

Number	Weight	Transmission Ratio	Center Distance (mm)	Output power (KW)	Ordering instruction
1	50Kg	1:16	125	11.6	Please specify transmissionratio and type when ordering
2		1:18	125	10.3
3		1:14	125	11.72

_{^{B.Installation}}

1. The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2. The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3. The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
4. Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
5. While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
6. When ordering or using all kinds of WPD type, if the motor weight is bigger than the common,supporting set is required.

Speed ratio (I)	Center Distance (mm)	Input Speed (r/min)	Input Power (Kw)	Rated output Torque (N.M)	TransmissionEfficiency (%)
14	125	1500	11.2	1128	89
		1000	9.919	1276	87.4
16	125	1500	11.06	1136	88
		1000	9.651	1417	87.5
20	144	1500	13	1942	86.5
		1000	11.52	2512	85.4
25	125	1500	13	2166	84
		1000	11.4	2650	83

_^C.Usage

1. Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.
2. According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant.And then screw on the vent-plug, unlock the small cone-plug of vent-plug.Only after doing these, reducer is already for startinh up running.The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.
3. When abnormal circumstances occur, please stop and check reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95, under this temperature limit, if oil temperature no more goes up, please let reducer continue running).

Production Flow

Our Services

Customized Parts Solutions Ruibiao specialize in design, custom and manufacture electric motors,includingrack and pinion,Suspended platform,electric motor,Gearbox,safety device,elevator Overload Sensor,winch,cable,Limit Switch,worm gear.All of them can befully and easily customized (see some of the many customization options listed below). We committed to offer high quality, high performance, cost effective optionstomeet customersspecific demands.Choosing to customize one ofthe construction hoist spare partsin our Product Categories now!

Favorable Comments

Häufig gestellte Fragen

#SuperSeptemberSmall Speed Reducer Gearbox